減速機廠家報價品牌企業

齒輪減速機傳動，耗能低，性能優越。擺線針輪減速機是一種采用擺線針齒嚙合行星傳動原理的傳動機型，是一種理想的傳動裝置，具有許多優點，用途廣泛，并可正反運轉。

Gear reducer has high transmission efficiency, low energy cumption and superior performance. Cycloidal pinwheel reducer is a transmission type which adopts cycloid needle tooth meshing planetary transmission principle, and it is an ideal driving device. It has many advantages, widely used, and can run in reverse direction.

減速機與工作機的聯接：減速機直接套裝在工作機主軸上，當減速機運轉時，作用在減速機箱體上的反力矩，又安裝在減速機箱體上的反力矩支架或由其他方法來平衡。機直接相配，另一端與固定支架聯接.

The connection between the reducer and the working machine: the reducer is directly installed on the main shaft of the machine, when the reducer operates, the torque acting on the gearbox body is installed on the reverse torque support on the reduction box body or by other methods to balance. The machine is directly matched and the other end is connected with the fixed support.

降低減速機運轉時的齒輪傳動噪聲已成為行業內的重要研究課題，國內外不少學者都把齒輪傳動中輪齒嚙合剛度的變化看成是齒輪動載、振動和噪聲的主要因素。用修形的方法，使其動載荷及速度波動減至小，以達到降低噪聲的目的。這種方法在實踐中證明是一種較有效的方法。對于減速機的分類，細化開來，有擺線針輪減速機，行星齒輪減速機和蝸輪蝸桿減速機等。

Reducing the gear transmission noise of the reducer has become  research topic in the industry. Many scholars both at home and abroad regard the change of gear tooth meshing stiffness as the main factor of gear dynamic load, vibration and noise. The method of modification is used to minimize the dynamic load and speed fluctuation in order to reduce noise. This method is proved to be a more effective method in practice.

減速機動力源運轉速度 根據在不同轉速條件下對減速機的試驗表明，隨著減速機輸入轉速的增加，噪聲也將增大。 

The experimental study on the structural form of the reducer box shows that the cylindrical box is advantageous to vibration reduction. Under the same other conditi, the noise level of the cylindrical box is 5 dB lower than that of other types of box on average.