六安雨水混流泵生產廠家品質售后無憂“本信息長期有效”

混流泵

HW型蝸殼式混流泵按國家標準 新系列而設計的節能產品。其性能指標均達到國 先 水平，省材節能效果顯著。

HW Spiral Mixed-flow Pump is an efficient pump designed by latest

national standard.The performance indexes have been upto the international

advanced level and the material and energy saving result is remarkable.

（一）HW型混流泵由泵體、泵蓋、葉輪、泵軸和軸承體等主要零件構成。

I. HW Mixed-flow

pump is composed of pump casing, pump cover, impeller, pump spindle and bearing

body mainly.

         從水泵進水口看葉輪為逆時針方向旋轉（即箭頭所示方向旋轉。）

V.    Pump Diversion

     Look from inlet of pump, the impeller is

turning clockwise(turning as the direction indicated by rotation arrow)

軸套用來保護軸不使它與填料直接摩擦，若長期使用中發現軸套磨損過多，必須換軸套。

IV. Axile sleeve is used to protect the axle from friction

with padding.In long term using, change the axile sleeve

when the sleeve wears down too much.

（五）水泵軸的兩個支承是軸承體內的軸承，軸承體內存有適量潤滑脂以潤滑軸承。

V. Two supportings of water pump axile are bearings in

bearing body.There is some lubricating grease in bearing

body for lubricating bearing.

 7、填料發熱

 The padding is

 hot

 1、填料壓得太緊或四周緊密度不夠2、填料壓得偏斜與軸磨損嚴重

 1.The padding is

 pressed too tight or the around compactness is not enough

 2.The padding is

 pressed deflected and the axile wears seriously

 1、旋松壓蓋螺栓高速填料緊密度

 2、松開壓蓋重新均勻地上緊

 1.Loosen the gland bolts to adjust

 2.Loosen the gland bolts and tighten it again.