您好,歡迎來到易龍商務網!
全國咨詢熱線:18354823276

圣霖國際吊車軌廠家優選企業【圣霖國際】

【廣告】

發布時間:2020-12-31 03:08  






修正精度高,涂層厚度從幾微米到幾毫米,可對金屬工件呈現磨損、劃傷、、裂紋、破損變形、硬度降低、損害等缺點進行堆積、封孔、補對等修正功用,只須打磨、拋光,也可進行車、銑、 刨、磨等各類機械加工,以及電鍍等后期加工。

The thickness of the coating is high, and the thickness of the coating is from several microns to a few millimeters. It can be worn, scratched, pinholes, cracks, breakage and deformation, hardness reduction, damage and other shortcomings to accumulate, seal, and compensate for the defects, such as grinding, polishing, milling, milling, grinding and other kinds of mechanical processing, as well as electroplating later processing.


(1)堆焊前需先將軋輥輥身表面的疲勞層或缺陷,尤其是裂紋必須徹底清除;  

(2)在堆焊時,為了防止裂紋的產生,必須先加工軋輥輥身預熱,預熱溫度根據軋輥輥及堆焊材料而定。

(1) before welding, the fatigue layer or defect of the roller body surface must be first removed, especially the crack must be thoroughly removed.

(2) in the process of surfacing, in order to prevent cracks, the roller body must be pre heated, and the preheating temperature should be determined according to roll rolls and surfacing materials.




生產長材產品的軋機種類繁多,因此,軋機類型的選擇、布局,軋輥材質的選擇、軋輥尺寸的確定,選擇范圍也非常廣。同時,不同的軋機所選擇的軋輥也是不相同的,需要根據生產要求選擇軋輥。



There are a wide variety of rolling mills to produce long timber products. Therefore, the selection and layout of the type of rolling mill, the selection of the material of the roll and the determination of the size of the roll are also very wide. At the same time, the rolls chosen by  rolling mills are also the roller should be selected according to the production requirements.


行業推薦