圣霖國際聯接機生產品牌企業 圣霖國際精益求精

與平鍵聯接比較，花鍵聯接在強度、工藝和使用方面有下列特點：在軸上與轂孔上直接而均勻地制出較多的齒與槽，故聯接受力較為均勻；因槽較淺，齒根處應力集中較小，軸與轂的強度削弱較少。

Compared with the flat bond connection, the spline connection has the following characteristics in strength, process and use.More teeth and grooves are made directly and evenly on the shaft and hub hole, so the joint force is more uniform.

Because of the shallow groove, the stress at the root of the tooth is small, and the strength of the shaft and hub is weakened less.

型面聯接：是利用非圓剖面的軸與相應形狀的零件的轂孔配合而構成的聯接，作為機械傳動中的聯接方式，型面聯接相對于傳統的鍵聯接相比，具有聯接強度高，沒有應力集中，可以傳遞大扭矩且的同時也可以承受沖擊載荷，并且對于一些大型機械裝備來講其拆裝方便及維修便利。

is the hub hole type surface connection: the non-circular section axis and the corresponding shape parts with a connection, as the connection mode in mechanical transmission, compared with the traditional linkage type surface connection compared with connecting strength, no stress , can  large torque and high efficiency at the same time it can withstand the impact load, and for some large mechanical equipment for its disassembly and convenient maintenance.

機用虎鉗的結構及原理。機用虎鉗是機械加工中常用的裝夾機構，其結構如圖1所示。其主要工作原理：轉動方頭帶動絲杠，在螺母（通過緊固螺釘固定在虎鉗體上）的作用下，做螺旋運動的絲杠帶動與之聯接的活動座沿絲杠軸線方向來回移動。

The structure and principle of machine vise. Machine vise is a common clamping mechanism in mechanical processing. Its structure is shown in Figure 1. The main principle: rotation of the lead screw nut in the square, (fixed in the vise body through a fastening screw) under the action of moving spirally driven screw connected with the movable seat to move back and forth along the screw axis.